SECO LARM USA Home Security System SA 025 User Guide

®
ENFORCER  
SA-025 Timer Module  
The SA-025 Programmable Timer Module is suitable for a wide range  
of timed security and access control operations, such as door unlock  
timing, siren or bell timer, and so on. Auto-sensing of input voltage  
and DIP switches for programming make installation easy.  
Current draw - 3mA (standby) or 40mA  
(relay energized)  
Board measures 2 /8" x 2 /2" (73 x 63 mm)  
Functions programmed via DIP switches -  
no jumpers to cut  
Timer can be set from 1 sec. to 60 minutes  
Can be triggered by positive voltage (+DC),  
or closure or opening of dry contact.  
Relay can be programmed to activate at the  
start or at the end of the timing cycle  
Relay can also be set to activate for one  
second at the end of the timing cycle  
7
1
DIP switch settings  
Programmable for pulse (flash) activation  
Built-in reset function to manually reset  
timing cycle  
Form-C relay, contacts rated 8A @  
120VAC/24VDC  
LED indicates relay is energized  
SwitchFunction  
ON  
At end of trigger  
OFF  
#1 Timing starts:  
At start of trigger  
#2 How does the timing start?  
#3 Timer setting:  
When the module is powered up Connecting (+) to TRG  
In seconds  
In minutes  
#4 Steady relay output, or pulse/flash?  
#5 When does the relay output start?  
Steady relay output  
At end of timing period  
Pulse/flash output  
At start of timing period  
Delayed output  
12VDC/24VDC operation (auto sensing)  
#6 Relay output mode, delayed or instant? Instant output  
Other Products Available from SECO-LARM  
Power Supply/Chargers  
Voltage Current Current  
DC (continuous) (peak)  
Model #  
6,12  
1.5A  
1.5A  
2.5A  
4.0A  
2.0A  
2.0A  
3.0A  
5.0A  
ST-1206-1.5A  
6,12,24  
ST-2406-2A  
ST-2406-3A 6,12,24  
ST-2406-5A 6,12,24  
ST-1206-1.5A  
ST-2406-2A  
ST-2406-3A  
ST-2406-5A  
Relay Board  
SR-2224-C5  
Plus many, many other  
products for commercial,  
residential and vehicle  
security. See our website for  
details, or contact us for a  
catalog .  
5-Amp relay, DPDT, Form-C.  
6/12/24 VDC operation.  
LED indicates power.  
Relay can be wired for load  
switching, dry contact, latching,  
reverse polarity, line seizure, etc.  
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.  
TimerPdf070103.pmd  
For more information, contact: Tel: 1-800-662-0800 (domestic U.S. & Canada)  
Tel: 1-949-261-2999 (California & international) Fax: 1-949-261-7326 Email: [email protected] Website: www.seco-larm.com  
 

RCA CRT Television F25442 User Guide
Reebok Fitness Home Gym RBE09950 User Guide
Ricoh All in One Printer D014 User Guide
RocketFish Video Gaming Accessories RF GXBX011 User Guide
Rosewill Network Card RC 101 User Guide
Russell Hobbs Juicer CPSVT26XX 10X User Guide
Samsung Printer 6345N User Guide
Samsung Security Camera SCC B5351GP User Guide
Sangean Electronics Radio DCR 200 User Guide
Sears Drill 11321308 User Guide